The latest tech from one of the industries premier manufacturers: All facets of the manufacturing process has been addressed, not only in performance & size, but also in their modern design to suit the most discerning client.

Intensity matches, if not then exceeds any product in it's class. So much so, that a dimming function was incorporated for night time use.

This ultra low profile, compact slimline design makes them easy to install on any part of a vehicle.  

• Approvals of SAE J595 / ECE R65 Class 1 / EMI-R10
• Dimming Function {White wire switched to earth}
• Multiple head synchronisation & Asynchronisation
• Alternating {Wig Wag} flash set up {Asynchronisation}
• 2 x 25 patterns
• IP67, 10~30vdc, -30 to +50 deg, Fuse @ 2A
• Alloy base with PC lens
• Linear lens design providing greatest impact
• 91 x 28 x 8 mm
• Screw mounting & also 
• Provided with super strong 3M double sided tape
• Wiring instructions found below

Operating Instruction

l   Connect RED wire to +VDC – Fuse @2A.

l   Connect BLACK wire to chassis ground.

l   Connect BLUE wire to BLACK wire momentarily to select next flash pattern.

l   Connect WHITE wire to BLACK wire {Earth} to DIM, by use of an On/Off switch for example

Synchronised Flash

Connect BLUE wires of all units together and set all units to the synchronised pattern.

Alternate Flash